Showing 1–24 of 88 results
A Atmel T5577 Proximity Card
The ATA5577 is a contactless read/write identification IC (IDIC®) for applications in the 125-kHz or 134-kHz frequency band. A single coil connected to the chip serves as the IC’s power supply and bi-directional communication interface. The antenna and chip together form a transponder or tag. The on-chip 363-bit EEPROM (11 blocks with 33 bits each) can be read and written block-wise from a base station (reader). Data is transmitted from the IDIC (uplink) using load modulation. This is achieved by damping the RF field with a resistive load between the two terminals Coil 1 and Coil 2. The IC receives and decodes serial base station commands (downlink), which are encoded as 100% amplitude modulated (OOK) pulse-interval-encoded bit streams. A complete datasheet with further technical data is available on request. Please contact your local sales office.
Blank or Printed Cards, Key Fobs, Wristband, Round Coin Tags & RFID Labels; We will offer you the Best Possible Pricing! Up to 65% OFF
A True American Company! Selling Millions and Millions of SmartCard Around the World
Click: Quote Request
Please Call: 1-800-537-1708
ALIEN HIGGS-3 RFID Labels or Card
The Alien Technology ALN-9654 G is an ultra-high-performance, general-purpose RFID inlay especially well-suited for high-dielectric materials such as windshields and reusable plastic pallets or containers.
- Exceptional performance.
- EPC Gen 2 (v1.2.0) compliant.
- ISO/IEC 18000-6C compliant.
- Worldwide RFID UHF operation (840-960MHz).
- Higgs-3 IC with 800-bits of Nonvolatile Memory.
- Pre-programmed with a unique, unalterable 64-bit serial number (ideal for authentication).
- User Memory can be Block Perma-Locked.
- User Memory can be Read Password protected in 64-bit blocks, prohibiting unintended Reads without an access password.
- Supports all Mandatory and Optional Gen 2 commands including item level
- Custom commands for high speed programming.
- Available in high-yield, high-capacity dry/wet inlay rolls for high volume converting processes.
Alien Squiglette RFID Inlay, Labels, Card ALN-9730, Higgs-4
Powered by Alien®’s break-through Higgs™3 UHF RFID IC and innovative Squiglette antenna design, the ALN-9630 delivers industry leading EPC Gen 2 performance and reliability in a narrower width than it’s bigger brother, the Squiggle®, and makes it ideal for apparel applications. ALN-9630 inlays are World Tag compliant, enabling consistent operation across the diverse frequencies of the Americas, Europe, Middle East, Asia, and Africa. With its Higgs-3 core, the Squiglette delivers excellent performance and a rich feature set expanding the standard 32-bit TID with an additional 64-bit Unique TID for authentication and serialization applications, an extensible EPC memory bank, 512-bits of user memory for distributed data applications, and password protected read and write support capabilities to prevent unauthorized viewing and modification of the tag’s data. SPECIFICATIONS ELECTRICAL: Air Interface Protocol: EPCglobal UHF Class 1 Gen 2 (ISO 18000-6C) Operating Frequency: Global 840-960 MHz IC Type: Alien Higgs-3 Memory: EPC 96 bits, User 512 bits, TID 64 bits EPC Memory Content: Unique, randomized number Max Read Distance: > 3.04 m (10 ft) Applicable Surface Materials: Wood, plastic, glass, cardboard MECHANICAL: Tag Form Factor: White wet inlay Tag Materials: TT printable white film Attachment Method: General purpose adhesive Dimensions: 2.87 x 0.5 in (73 x 12.7 mm) Weight: < 1 g ENVIRONMENT: Operating Temperature: -40° to +70°C
AT45DB041 Card
AT45DB041 Card
[themify_button style=”large green rounded” link=”https://smartcardamerica.us/?page_id=16650″ text=”#ffffff” target=”_blank” ]Request Quote[/themify_button]
AT45DB041D
Features
• Single 2.5V or 2.7V to 3.6V Supply
• RapidS Serial Interface: 66 MHz Maximum Clock Frequency
– SPI Compatible Modes 0 and 3
• User Configurable Page Size
– 256 Bytes per Page
– 264 Bytes per Page
– Page Size Can Be Factory Pre-configured for 256 Bytes
• Page Program Operation
– Intelligent Programming Operation
– 2,048 Pages (256/264 Bytes/Page) Main Memory
• Flexible Erase Options
– Page Erase (256 Bytes)
– Block Erase (2 Kbytes)
– Sector Erase (64 Kbytes)
– Chip Erase (4 Mbits)
• Two SRAM Data Buffers (256/264 Bytes)
– Allows Receiving of Data while Reprogramming the Flash Array
• Continuous Read Capability through Entire Array
– Ideal for Code Shadowing Applications
• Low-power Dissipation
– 7 mA Active Read Current Typical
– 25 μA Standby Current Typical
– 15 μA Deep Power-down Typical
• Hardware and Software Data Protection Features
– Individual Sector
• Sector Lockdown for Secure Code and Data Storage
– Individual Sector
• Security: 128-byte Security Register
– 64-byte User Programmable Space
– Unique 64-byte Device Identifier
• JEDEC Standard Manufacturer and Device ID Read
• 100,000 Program/Erase Cycles Per Page Minimum
• Data Retention – 20 Years
• Industrial Temperature Range
• Green (Pb/Halide-free/RoHS Compliant) Packaging Options
Quote Request
AT88SC0204C Card
AT88SC0204C Card
AT88SC0204C, CryptoMemory 2 Kbit
Features
• One of a Family of 9 Devices with User Memories from 1 Kbit to 256-Kbit
• 2-Kbit (256 Bytes) EEPROM User Memory
– Four 64-byte (512-bit) Zones
– Self-timed Write Cycle
– Single Byte or 16-byte Page Write Mode
– Programmable Access Rights for Each Zone
• 2-Kbit Configuration Zone
– 37-byte OTP Area for User-defined Codes
– 160-byte Area for User-defined Keys and Passwords
• High Security Features
– 64-bit Mutual Authentication Protocol (Under License of ELVA)
– Encrypted Checksum
– Stream Encryption
– Four Key Sets for Authentication and Encryption
– Eight Sets of Two 24-bit Passwords
– Anti-tearing Function
– Voltage and Frequency Monitor
• Smart Card Features
– ISO 7816 Class A (5V) or Class B (3V) Operation
– ISO 7816-3 Asynchronous T = 0 Protocol (Gemplus® Patent) *
– Multiple Zones, Key Sets and Passwords for Multi-application Use
– Synchronous 2-wire Serial Interface for Faster Device Initialization *
– Programmable 8-byte Answer-To-Reset Register
– ISO 7816-2 Compliant Modules
• Embedded Application Features
– Low Voltage Operation: 2.7V to 5.5V
– Secure Nonvolatile Storage for Sensitive System or User Information
– 2-wire Serial Interface
– 1.0 MHz Compatibility for Fast Operation
– Standard 8-lead Plastic Packages, Green Compliant (exceeds RoHS)
– Same Pinout as 2-wire Serial EEPROMs
• High Reliability
– Endurance: 100,000 Cycles
– Data Retention: 10 years
– ESD Protection: 4,000V min
Quote Request
AT88SC0404C Card
AT88SC0404C, CryptoMemory 4 Kbit
Features:
• One of a Family of 9 Devices with User Memories from 1 Kbit to 256-Kbit
• 4-Kbit (512-byte) EEPROM User Memory
– Four 128-byte (1-Kbit) Zones
– Self-timed Write Cycle
– Single Byte or 16-byte Page Write Mode
– Programmable Access Rights for Each Zone
• 2-Kbit Configuration Zone
– 37-byte OTP Area for User-defined Codes
– 160-byte Area for User-defined Keys and Passwords
• High Security Features
– 64-bit Mutual Authentication Protocol (Under license of ELVA)
– Encrypted Checksum
– Stream Encryption
– Four Key Sets for Authentication and Encryption
– Eight Sets of Two 24-bit Passwords
– Anti-tearing Function
– Voltage and Frequency Monitor
• Smart Card Features
– ISO 7816 Class A (5V) or Class B (3V) Operation
– ISO 7816-3 Asynchronous T = 0 Protocol (Gemplus® Patent) *
– Multiple Zones, Key Sets and Passwords for Multi-application Use
– Synchronous 2-wire Serial Interface for Faster Device Initialization *
– Programmable 8-byte Answer-To-Reset Register
– ISO 7816-2 Compliant Modules
• Embedded Application Features
– Low Voltage Operation: 2.7V to 5.5V
– Secure Nonvolatile Storage for Sensitive System or User Information
– 2-wire Serial Interface
– 1.0 MHz Compatibility for Fast Operation
– Standard 8-lead Plastic Packages, Green Compliant (exceeds RoHS)
– Same Pinout as 2-wire Serial EEPROMs
• High Reliability
– Endurance: 100,000 Cycles
– Data Retention: 10 years
– ESD Protection: 4,000V min
Quote Request
AT88SC0808C Card
AT88SC0808C Card
AT88SC0808C, CryptoMemory 8 Kbit
Features:
• One of a Family of 9 Devices with User Memories from 1 Kbit to 256-Kbit
• 4-Kbit (512-byte) EEPROM User Memory
– Four 128-byte (1-Kbit) Zones
– Self-timed Write Cycle
– Single Byte or 16-byte Page Write Mode
– Programmable Access Rights for Each Zone
• 2-Kbit Configuration Zone
– 37-byte OTP Area for User-defined Codes
– 160-byte Area for User-defined Keys and Passwords
• High Security Features
– 64-bit Mutual Authentication Protocol (Under license of ELVA)
– Encrypted Checksum
– Stream Encryption
– Four Key Sets for Authentication and Encryption
– Eight Sets of Two 24-bit Passwords
– Anti-tearing Function
– Voltage and Frequency Monitor
• Smart Card Features
– ISO 7816 Class A (5V) or Class B (3V) Operation
– ISO 7816-3 Asynchronous T = 0 Protocol (Gemplus® Patent) *
– Multiple Zones, Key Sets and Passwords for Multi-application Use
– Synchronous 2-wire Serial Interface for Faster Device Initialization *
– Programmable 8-byte Answer-To-Reset Register
– ISO 7816-2 Compliant Modules
• Embedded Application Features
– Low Voltage Operation: 2.7V to 5.5V
– Secure Nonvolatile Storage for Sensitive System or User Information
– 2-wire Serial Interface
– 1.0 MHz Compatibility for Fast Operation
– Standard 8-lead Plastic Packages, Green Compliant (exceeds RoHS)
– Same Pinout as 2-wire Serial EEPROMs
• High Reliability
– Endurance: 100,000 Cycles
– Data Retention: 10 years
– ESD Protection: 4,000V min
Quote Request
AT88SC102 Card
AT88SC102 Card
Features
• 1K X 1 Serial EEPROM with Security Logic
• Two Application Zones
• Stores and Validates Security Codes
• Maximum of Eight Incorrect Security Code Attempts
• Provides Transport Code Security
• Low Voltage Operation: 2.7V to 5.5V
• Manufactured using Low Power CMOS Technology
• Supports ISO/IEC 7816-3 Synchronous Protocol
• VPP Internally Generated
• 2 μs Read Access Time; 2 ms Write Cycle Time
• Temperature Range from -40°C to 85°C
• ESD Protection 4,000V Minimum.
• High Reliability:
100,000 Program/Erase Cycles Guaranteed
Data Retention of 10 years
Quote Request
AT88SC12816C Card
AT88SC12816C Card
AT88SC12816C, CryptoMemory 8 Kbit
Features:
• One of a Family of 9 Devices with User Memories from 1 Kbit to 256-Kbit
• 4-Kbit (512-byte) EEPROM User Memory
– Four 128-byte (1-Kbit) Zones
– Self-timed Write Cycle
– Single Byte or 16-byte Page Write Mode
– Programmable Access Rights for Each Zone
• 2-Kbit Configuration Zone
– 37-byte OTP Area for User-defined Codes
– 160-byte Area for User-defined Keys and Passwords
• High Security Features
– 64-bit Mutual Authentication Protocol (Under license of ELVA)
– Encrypted Checksum
– Stream Encryption
– Four Key Sets for Authentication and Encryption
– Eight Sets of Two 24-bit Passwords
– Anti-tearing Function
– Voltage and Frequency Monitor
• Smart Card Features
– ISO 7816 Class A (5V) or Class B (3V) Operation
– ISO 7816-3 Asynchronous T = 0 Protocol (Gemplus® Patent) *
– Multiple Zones, Key Sets and Passwords for Multi-application Use
– Synchronous 2-wire Serial Interface for Faster Device Initialization *
– Programmable 8-byte Answer-To-Reset Register
– ISO 7816-2 Compliant Modules
• Embedded Application Features
– Low Voltage Operation: 2.7V to 5.5V
– Secure Nonvolatile Storage for Sensitive System or User Information
– 2-wire Serial Interface
– 1.0 MHz Compatibility for Fast Operation
– Standard 8-lead Plastic Packages, Green Compliant (exceeds RoHS)
– Same Pinout as 2-wire Serial EEPROMs
• High Reliability
– Endurance: 100,000 Cycles
– Data Retention: 10 years
– ESD Protection: 4,000V min
Quote Request
AT88SC153 Card
AT88SC153 Card
Features
• One 64 x 8 (512-bit) Configuration Zone
• Three 64 x 8 (512-bit) User Zones
• Programmable Chip Select
• Low-voltage Operation: 2.7V to 5.5V
• Two-wire Serial Interface
• 8-byte Page Write Mode
• Self-timed Write Cycle (10 ms max)
• Answer-to-reset Register
• High-security Memory Including Anti-wiretapping
– 64-bit Authentication Protocol (under exclusive patent license from ELVA)
– Secure Checksum
– Configurable Authentication Attempts Counter
– Two Sets of Two 24-bit Passwords
– Specific Passwords for Read and Write
– Four Password Attempts Counters
– Selectable Access Rights by Zone
• ISO Compliant Packaging
• High Reliability
– Endurance: 100,000 Cycles
– Data Retention: 100 Years
– ESD Protection: 4,000V min
• Low-power CMOS
Quote Request
AT88SC1608 Card
AT88SC1608 Card
Features
• One 128 x 8 (1K bit) Configuration Zone
• Eight 256 x 8 (16K bits) User Zones
• Low Voltage Operation: 2.7V to 5.5V
• Two-wire Serial Interface
• 16-byte Page Write Mode
• Self-timed Write Cycle (10 ms max)
• Answer-to-Reset Register
• High Security Memory Including Anti-wiretapping
– 64-bit Authentication Protocol (under exclusive patent license from ELVA)
– Authentication Attempts Counter
– Eight Sets of Two 24-bit Passwords
– Specific Passwords for Read and Write
– Sixteen Password Attempts Counters
– Selectable Access Rights by Zone
• ISO Compliant Packaging
• High Reliability
– Endurance: 100,000 Cycles
– Data Retention: 100 Years
– ESD Protection: 4,000V (min)
• Low-power CMOS
Quote Request
AT88SC1616C Card
AT88SC1616C Card
AT88SC1616C, CryptoMemory 8 Kbit
Features:
• One of a Family of 9 Devices with User Memories from 1 Kbit to 256-Kbit
• 4-Kbit (512-byte) EEPROM User Memory
– Four 128-byte (1-Kbit) Zones
– Self-timed Write Cycle
– Single Byte or 16-byte Page Write Mode
– Programmable Access Rights for Each Zone
• 2-Kbit Configuration Zone
– 37-byte OTP Area for User-defined Codes
– 160-byte Area for User-defined Keys and Passwords
• High Security Features
– 64-bit Mutual Authentication Protocol (Under license of ELVA)
– Encrypted Checksum
– Stream Encryption
– Four Key Sets for Authentication and Encryption
– Eight Sets of Two 24-bit Passwords
– Anti-tearing Function
– Voltage and Frequency Monitor
• Smart Card Features
– ISO 7816 Class A (5V) or Class B (3V) Operation
– ISO 7816-3 Asynchronous T = 0 Protocol (Gemplus® Patent) *
– Multiple Zones, Key Sets and Passwords for Multi-application Use
– Synchronous 2-wire Serial Interface for Faster Device Initialization *
– Programmable 8-byte Answer-To-Reset Register
– ISO 7816-2 Compliant Modules
• Embedded Application Features
– Low Voltage Operation: 2.7V to 5.5V
– Secure Nonvolatile Storage for Sensitive System or User Information
– 2-wire Serial Interface
– 1.0 MHz Compatibility for Fast Operation
– Standard 8-lead Plastic Packages, Green Compliant (exceeds RoHS)
– Same Pinout as 2-wire Serial EEPROMs
• High Reliability
– Endurance: 100,000 Cycles
– Data Retention: 10 years
– ESD Protection: 4,000V min
Quote Request
AT88SC25616C Card
AT88SC12816C Card
AT88SC12816C, CryptoMemory 8 Kbit
Features:
• One of a Family of 9 Devices with User Memories from 1 Kbit to 256-Kbit
• 4-Kbit (512-byte) EEPROM User Memory
– Four 128-byte (1-Kbit) Zones
– Self-timed Write Cycle
– Single Byte or 16-byte Page Write Mode
– Programmable Access Rights for Each Zone
• 2-Kbit Configuration Zone
– 37-byte OTP Area for User-defined Codes
– 160-byte Area for User-defined Keys and Passwords
• High Security Features
– 64-bit Mutual Authentication Protocol (Under license of ELVA)
– Encrypted Checksum
– Stream Encryption
– Four Key Sets for Authentication and Encryption
– Eight Sets of Two 24-bit Passwords
– Anti-tearing Function
– Voltage and Frequency Monitor
• Smart Card Features
– ISO 7816 Class A (5V) or Class B (3V) Operation
– ISO 7816-3 Asynchronous T = 0 Protocol (Gemplus® Patent) *
– Multiple Zones, Key Sets and Passwords for Multi-application Use
– Synchronous 2-wire Serial Interface for Faster Device Initialization *
– Programmable 8-byte Answer-To-Reset Register
– ISO 7816-2 Compliant Modules
• Embedded Application Features
– Low Voltage Operation: 2.7V to 5.5V
– Secure Nonvolatile Storage for Sensitive System or User Information
– 2-wire Serial Interface
– 1.0 MHz Compatibility for Fast Operation
– Standard 8-lead Plastic Packages, Green Compliant (exceeds RoHS)
– Same Pinout as 2-wire Serial EEPROMs
• High Reliability
– Endurance: 100,000 Cycles
– Data Retention: 10 years
– ESD Protection: 4,000V min
Quote Request