Request Quote
ALIEN HIGGS 3 Chip RFID UHF Metal Tag RCP8003
ALIEN G RFID WHITE WET INLAY (ALN-9654, HIGGS-3)
Powered by Alien’s break-through Higgs3 UHF RFID IC and innovative antenna design, the ALN-9654 delivers industry leading EPC Gen 2 performance and reliability. ALN-9654 inlays are World Tag compliant, enabling consistent operation across the diverse frequencies of the Americas, Europe, Middle East, Asia, and Africa. With its Higgs-3 core, the “G” delivers ultra-high, “best-of-breed” performance. It is especially wellsuited for challenging materials with high-dielectrics, such as plastic and glass (hence the “G” nickname). The “G” inlay comprises a rich feature set including a 32-bit TID, a 64-bit Unique TID for authentication and serialization applications, an extensible EPC memory bank, 512-bits of user memory for distributed data applications, and password protected read and write support capabilities to prevent unauthorized viewing and modifi cation of the tag’s data.
Data Sheet — Alien G RFID White Wet Inlay (ALN-9654, Higgs-3)
Why Buy?
The Alien Technology ALN-9654 G is an ultra-high-performance, general-purpose RFID inlay especially well-suited for high-dielectric materials such as windshields and reusable plastic pallets or containers.
FEATURES
- Exceptional performance.
- EPC Gen 2 (v1.2.0) compliant.
- ISO/IEC 18000-6C compliant.
- Worldwide RFID UHF operation (840-960MHz).
- Higgs-3 IC with 800-bits of Nonvolatile Memory.
- Pre-programmed with a unique, unalterable 64-bit serial number (ideal for authentication).
- User Memory can be Block Perma-Locked.
- User Memory can be Read Password protected in 64-bit blocks, prohibiting unintended Reads without an access password.
- Supports all Mandatory and Optional Gen 2 commands including item level
- Custom commands for high speed programming.
- Available in high-yield, high-capacity dry/wet inlay rolls for high volume converting processes.
ALIEN HIGGS 3 Chip UHF Metal Tag
ALIEN HIGGS 3 Chip UHF Metal Tag .860 / 960MHz Rfid Tag (RCP8003) Metal Tag(RCP8003) Introduction: This tag is designed on FR-4 base material. It solves the problem that tags can not be attached to metal surface(Reading distance even will be father when it is attached to metal surface). At the same time, it can work outside in the hard environment. It complaints with EPC C1G2 (ISO18000-6C), operating frequency is 860?960MHz (It can be used worldwide). Each tag has a unique ID and stores user data.
Quote Request
or
Please Call 1-800-537-1708
ALIEN HIGGS-3 Gen2 PVC UHF CARD
Alien Higgs-3 NFC CARD is a highly integrated single chip UHF RFID Tag IC. The chip conforms to the EPCglobal Class 1 Gen 2 specifications and provides state-of-the-art performance for a broad range of UHF RFID tagging applications.
Features
› Meets EPCglobal Gen2 (V 1.2.0) as well as ISO/IEC 18000-6C
› Worldwide operation in the RFID UHF bands (860-960 MHz)
› 800-Bits of Nonvolatile Memory
› 96-EPC Bits, extensible to 480 Bits
› 512 User Bits
› 64 Bit Unique TID
› 32 Bit Access and 32 bit Kill Passwords
› Pre-Programmed with a unique, unalterable 64-bit serial number
› User Memory can be Block Perma-Locked as well as read password protected in 64 Bit Blocks
› Supports all Mandatory and Optional Commands including Item Level Commands
› Custom Commands for high speed programming;
30 tags per second for the 96-bit EPC number
› Low power operation for both read and program
› Exceptional operating range, up to 10m with appropriate antenna
Quote Request
or
Please Call 1-800-537-1708
ALIEN HIGGS-3 RFID Labels or Card
The Alien Technology ALN-9654 G is an ultra-high-performance, general-purpose RFID inlay especially well-suited for high-dielectric materials such as windshields and reusable plastic pallets or containers.
- Exceptional performance.
- EPC Gen 2 (v1.2.0) compliant.
- ISO/IEC 18000-6C compliant.
- Worldwide RFID UHF operation (840-960MHz).
- Higgs-3 IC with 800-bits of Nonvolatile Memory.
- Pre-programmed with a unique, unalterable 64-bit serial number (ideal for authentication).
- User Memory can be Block Perma-Locked.
- User Memory can be Read Password protected in 64-bit blocks, prohibiting unintended Reads without an access password.
- Supports all Mandatory and Optional Gen 2 commands including item level
- Custom commands for high speed programming.
- Available in high-yield, high-capacity dry/wet inlay rolls for high volume converting processes.
Alien Squiglette RFID Inlay, Labels, Card ALN-9730, Higgs-4
Powered by Alien®’s break-through Higgs™3 UHF RFID IC and innovative Squiglette antenna design, the ALN-9630 delivers industry leading EPC Gen 2 performance and reliability in a narrower width than it’s bigger brother, the Squiggle®, and makes it ideal for apparel applications. ALN-9630 inlays are World Tag compliant, enabling consistent operation across the diverse frequencies of the Americas, Europe, Middle East, Asia, and Africa. With its Higgs-3 core, the Squiglette delivers excellent performance and a rich feature set expanding the standard 32-bit TID with an additional 64-bit Unique TID for authentication and serialization applications, an extensible EPC memory bank, 512-bits of user memory for distributed data applications, and password protected read and write support capabilities to prevent unauthorized viewing and modification of the tag’s data. SPECIFICATIONS ELECTRICAL: Air Interface Protocol: EPCglobal UHF Class 1 Gen 2 (ISO 18000-6C) Operating Frequency: Global 840-960 MHz IC Type: Alien Higgs-3 Memory: EPC 96 bits, User 512 bits, TID 64 bits EPC Memory Content: Unique, randomized number Max Read Distance: > 3.04 m (10 ft) Applicable Surface Materials: Wood, plastic, glass, cardboard MECHANICAL: Tag Form Factor: White wet inlay Tag Materials: TT printable white film Attachment Method: General purpose adhesive Dimensions: 2.87 x 0.5 in (73 x 12.7 mm) Weight: < 1 g ENVIRONMENT: Operating Temperature: -40° to +70°C
Atmel AT24C02-ET Card
Features
• Low-voltage and Standard-voltage Operation
– 2.7 (VCC = 2.7V to 5.5V)
– 1.8 (VCC = 1.8V to 5.5V)
• Internally Organized 128 x 8 (1K), 256 x 8 (2K), 512 x 8 (4K),
1024 x 8 (8K) or 2048 x 8 (16K)
• Two-wire Serial Interface
• Schmitt Trigger, Filtered Inputs for Noise Suppression
• Bidirectional Data Transfer Protocol
• 100 kHz (1.8V) and 400 kHz (2.7V, 5V) Compatibility
• Write Protect Pin for Hardware Data Protection
• 8-byte Page (1K, 2K), 16-byte Page (4K, 8K, 16K) Write Modes
• Partial Page Writes Allowed
• Self-timed Write Cycle (5 ms max)
• High-reliability
– Endurance: 1 Million Write Cycles
– Data Retention: 100 Years
• Automotive Devices Available
• 8-lead JEDEC PDIP, 8-lead JEDEC SOIC, 8-lead Ultra Thin Mini-MAP (MLP 2×3), 5-lead
SOT23, 8-lead TSSOP and 8-ball dBGA2 Packages
• Die Sales: Wafer Form, Waffle Pack and Bumped Wafers
Description
The AT24C01A/02/04/08A/16A provides 1024/2048/4096/8192/16384 bits of serial
electrically erasable and programmable read-only memory (EEPROM) organized as
128/256/512/1024/2048 words of 8 bits each. The device is optimized for use in many
industrial and commercial applications where low-power and low-voltage operation
are essential. The AT24C01A/02/04/08A/16A is available in space-saving 8-lead
PDIP, 8-lead JEDEC SOIC, 8-lead Ultra Thin Mini-MAP (MLP 2×3), 5-lead SOT23
(AT24C01A/AT24C02/AT24C04), 8-lead TSSOP, and 8-ball dBGA2 packages and is
accessed via a Two-wire serial interface. In addition, the entire family is available in
2.7V (2.7V to 5.5V) and 1.8V (1.8V to 5.5V) versions.
Atmel AT93C46A Card
The AT93C46 provides 1024 bits of serial electrically erasable programmable read
only memory (EEPROM) organized as 64 words of 16 bits each, when the ORG pin is
connected to VCC and 128 words of 8 bits each when it is tied to ground. The device
is optimized for use in many automotive applications where low power and low voltage
operations are essential.
Please Call Us For Quote!
Toll Free: 1-800-537-1708
Avansia Card Printer
Original price was: $6,100.00.$5,649.00Current price is: $5,649.00.Part Number: AV1H0VVCBD
Avansia is a Retransfer technology card printer for very high-quality card delivery. Designed for rigorous use. Avansia is extremely robust and provides high-security card issuance. Capable of issuing more than 140 single-sided color cards per hour. it is ideal for card issuance in medium and large quantities.
Robustness for high-security card issuance.
Avansia is a Retransfer technology direct-to-card printer for very high-quality card delivery. Designed for rigorous use, Avansia is extremely robust .and provides high-security card issuance.
Capable of issuing more than 140 single-sided color cards per hour. it is ideal for card issuance in medium and large quantities.
Avansia is ideal for delivering:
Corporate ID cards.
Secure access badges.
Student cards.
Payment cards.
Loyalty cards / gift cards.
National ID cards.
Driver’s licenses.
Click: avansia_kb-ava1-109-eng-us_rev_b2_1
Card Printer – SmartCard America HID8500
Original price was: $11,895.00.$6,899.99Current price is: $6,899.99.Part Number: 088552
HID GLOBAL, HDP8500 BASE MODEL CARD PRINTER, DUAL-SIDED, 32MB MEMORY, THREE YEAR PRINTER WARRANTY, LIFETIME PRINTHEAD WARRANTY
HID® FARGO® HDP8500 Industrial & Government ID Card Printer & Encoder.
Fargo HDP8500 Laminator – Dual-Sided (not Included)
Free Shipping.
The HID FARGO HDP8500 industrial ID card printer and encoder is the superior industrial ID printer for extended-run, high throughput ID personalization and issuance. It’s especially suited for large government ID card programs and laborious service bureau conditions, as well as demanding university and large enterprise environments.
Solid metal cabinetry and precision-engineered interior components create a stable printer environment that operates reliably over continuous runs. In fact, the HDP8500 industrial card printer and encoder is loaded with features that maximize card yield per shift: multi-card processing capabilities, 400-card input hopper capacity, accessible card path and graphical touch screen interface, and built-in physical and electronic security features. These features are all designed to ensure continuous production, even in the most demanding environments. Combined with the included HID FARGO Workbench diagnostic utility facilitates printer maintenance. Its Color Assist tool matches spot colors, ensuring accurate prints of graphics such as company logos.
The HID FARGO HDP8500 ID Card Printer and Encoder features optional modules to provide you with additional security, such as the interoperable Lamination module; the Laser Engraver module for the highest level of secure card printing; and the Laser Writer module to create vanGO® cards that feature a unique visual security patch that writes the cardholder’s image to the card so that it cannot be counterfeited. Also optionally available is the High Durable HDP film that can be used to create even more robust and durable credentials.
For high duty-cycle performance, the FARGO HDP8500 Industrial ID Card Printer and Encoder delivers:
- System reliability over continuous runs
- High-volume card throughput for maximum yields per shift
- Operational convenience to optimize uptime
- Issuance security that meets industry standards
- Additional on-card visual security with the HDP8500 LaserWriter module and vanGO ID cards to create a One-2-One™ relationship between the card and the cardholder that is nearly impossible to counterfeit
FARGO HDP8500 Industrial & Government ID Card Printer and Encoder Applications
- Government-to-citizen IDs:
- Driver Licenses
- National IDs
- Border crossing cards
- Voter registration
- Service bureau ID production
- University student ID/payment cards
Click: HID Fargo-hdp8500-printer-br-en
EM4200 Card, Key Fobs
EM4200 Card, Key Fobs
Introduction :
-
- This RFID key-fob card is for RFID Proximity access control system keypad, with unique digit ID number in each key-fob card (This RFID card is read only and not rewritable.) which make it possible to records by the control system to implement the pre-set function such as door open , password management. 125KHz Proxy Card
Application:
These products are widely applied in access control system and related applications .
Specification :
- Pre-programmed with unique digit ID number in each key fob card (This RFID card is read only and not rewritable.)
- Frequency : 125KHz
- Standard : EM4100 compatible
- Contactless transmission of data
- Material : PVC
- Reading Distance: 5cm ~ 12cm
- size: 85.6*54*0.76mm
- weight:5.77g/PCS
- Waterproof
EM4205 Card, EM4305 Card
EM4205 Card, 4305 card, EM4100 Card, EM4102 Card, Compatible TK4100 Card, Compatible EM4102 Card is a CMOS integrated circuit intended for use in electronic Read/Write RF transponders.
Contactless Identification Card, Access Control Card, 125kmz access card, NFC Acces Control Card, RFID Access Card,
