NRG™ SLE 66R35x

Infineon SECORA™ Pay S Standard Payment Cards

Infineon SECORA™ Pay W Tag Wristband

At the same time, the overwhelming success of contactless
cards is driving demand for wearable payments. Gartner
forecasts that wearable form factors are set to rise dramatically in popularity, with global sales projected to grow from
around 310 million devices in 2017 to over 500 million by
2021. Many experts have earmarked payment as the “killer
app” for wearables. According to a MasterCard press release,
over 175 million Europeans are interested in paying with
wearable devices. This press release states that almost one
quarter of all Europeans expect to start using “tap and go”
contactless wearables such as smart watches, bracelets and
key rings for everyday expenses.

SECORA™ Pay W

DATASHEET

Infineon SECORA™ Pay X Card

Infineon SLE 66CLX800PE Card (JCLX80JTOP20ID) 

Infineon SLE 66CLX800PE Card (JCLX80JTOP11ID) 

Infineon SLE 66CLX800PE Card (PCLX80TCOS12ID) 

Infineon SLE 66CLX800PE Card (PCLX80TCOS11ID) 

The dual interface security controllers SLE 66CLX800PE(M) belong to the family of the Infineon
Technologies SLE 66CxxxPE high-end security controller family in 0.22 µm CMOS technology which are designed for contactless security systems that requires continuous ongoing improvements with the highest degree of protection against fraudulent attacks. SLE 66CLX800PE(M) is targeting dual interface and pure contactless smart card applications such as national electronic passports, ID cards, banking, security access, digital signature, SIM cards with embedded contactless interface and transport.
SLE 66CLX800PE(M) offers 240 Kbytes of User-ROM, 256 bytes internal RAM, 6 Kbytes XRAM, 700 bytes Crypto RAM and 80 Kbytes EEPROM, which can be used as data and as program memory. The non-volatile memory consists of high reliability cells to guarantee data integrity. This is especially important when the EEPROM is used as program memory.
It features ISO/IEC 14443 Type B contactless interfaces and Type A and ISO/IEC 7816 contactbased interface on a single chip that can be operated in parallel to answer the need of the upcoming mobile phones with a contactless interface . They also support symmetric and asymmetric public-key algorithms such like DES, 3DES, Elliptic Curves and RSA independently of the
communication mode.

Solutions for rising security demands

DATASHEET

The SLE 66CX360PE is another member of the improved 66PE-series of Infineon Technologies. This high performance security crypto controller is manufactured in advanced 0.22 µm CMOS technology. It is downward compatible to existing 66P controller derivatives. The well known ECO2000 8/16 bit CPU provides the high efficiency of the SAB 8051 instruction set extended by additional powerful instructions together with enhanced performance, memory sizes and security features compared to existing 66P derivatives.
Performance: The internal clock frequency can be adjusted to a level up to 33 MHz either as a multiple of 1,2,3,4 to the external frequency or independent of the clock rate of the terminal with the help of the internal clock. It is adjustable according to either available power requirements or required performance.

DATASHEET

Infineon SLE 78CLX360P Card (Type: SLJ52GCA036BL /CL/DL)

Infineon SLE 78CLX360P Card (Type: SLJ52GDL036CL/DL)

Infineon SLE 78CLX360P Card (Type: SLJ52GLA036AL)

SLE 78CLX360P
16-bit Security Controller with “Integrity Guard”, optimized for
Contactless and Dual-Interface Payment and Identification
applications in 0.13 μm CMOS technology
36 kBytes E²PROM, 224 kBytes User ROM, 8 kBytes RAM
ISO/IEC 7816 and 14443 Type B & A Compliant Interfaces
Contactless interface acc. ISO/IEC 18092 passive mode
Crypto@2304T engine
with register lengths of up to 2304 bits, certified RSA and ECC
libraries
Symmetric Crypto Processor (SCP)
Triple-key-triple-DES and AES acceleration

Infineon SLE66R35 Contactless Card, SLE 66R35 Chip Card & Security ICs Mifare® NRG SLE 66R35 Intelligent 1 Kbyte Memory Chip

Mifare® NRG Intelligent 1 Kbyte Memory Chip with Interface for Contactless Transmission, Security Logic and Anticollision according to the Mifare®-System)
SLE 66R35 Mifare® System Overview SLE 66R35 is designed to operate in the Mifare system. Mifare is a contactless proximity smart
card system compliant to ISO/IEC 14443-2 and -3. The system consists of a smart card and a card
reader together with an antenna.

For more information please find the Specification SLE 66R35 DataSheet

Blank or Printed Cards, Key Fobs, Wristband, Round Coin Tags & RFID Labels; We will offer you the Best Possible Pricing! Up to 65% OFF 

A True American Company! Selling Millions and Millions of SmartCard Around the World

Click: Quote Request

Please Call: 1-800-537-1708

Security & Chip Card ICs
SLF9000 Terminal IC
Terminal IC for Contactless Chip Cards according to ISO 14443- Type A/ B with multiplexed/ demultiplexed 8- bit parallel interface

• Carrier freq. 13.56 MHz
• Data rate 106 Kbit/s
• Data transparent
• Register driven operation
• all ISO 14443 protocols supported
• additional other protocol ( e.g. type B2 -fast Siemens)
• Frame length up to 128 bytes
• Type A (e.g. Mifare), deterministic anticollision procedures supported by HW
• 8-bit parallel interface with three selectable modes:
  • non-multiplexed
  • multiplexed ( Intel compatible)
  • Enhanced Parallel Port (EPP) interface
• 128 Byte FIFO for burstwise data transmission/ reception
• Transmission error detection by CRC according ISO 3309 and CCITT-16 with programmable CRC modes
• Optional odd parity handling
• Supports inexpensive external single Analog Interface (AIF)
• Free programmable 16 bit hardware timer e.g. for real time operation
• Encoders
  • Transaction speed: 106 Kbit/s according to ISO 14443
  • Cascade level operation supported
• Decoders
  • Slot marker operation possible
  • Decoding algorithm parameters adjustable
  • Any number of time slots supported

Intelligent 2.5 Kbit EEPROM with Contactless Interface (ISO/IEC 15693 and ISO/IEC 18000-3 mode 1) Features Contactless Interface • Physical Interface and Anticollision compliant to ISO/IEC 15693 and ISO/IEC 18000-3 mode 1 — contactless transmission of data and supply energy — carrier frequency: 13.56 MHz — data rate up to 26 kbit/s — anticollision with identification of up to 30 tags/sec — read / write distance up to 150 cm depending on reader antenna configuration 2.5 Kbit EEPROM • ISO mode – block organization of memory — up to 56 blocks of user memory (block size 4 bytes) • Custom mode – page organization of memory — up to 32 pages of user memory (page size 8 bytes) • Unique chip identification number (UID) • EEPROM programming time per block/page < 4 ms • EEPROM endurance > 100,000 erase/write cycles1) • Data retention > 10 years1) Value Counters: up to 65536 (value range from 0 to 216-1) — each page in the User Area is configurable as a Value Counter — support of Anti-Tearing Electrical characteristics • ESD protection minimum 2 kV • Ambient temperature –25 … +70°C (for the chip)

The my-d® products are designed to meet increased demands for security and design flexibility.
The family of contactless memory my-d® supplies the user with different memory sizes and
incorporates security features to enable considerable flexibility in the application design.
The functional architecture, meaning the memory organisation and authentication of my-d®
products is the same for both, my-d® proximity (ISO/IEC 14443) and my-d® vicinity
(ISO/IEC 18000-3 mode 1 or ISO/IEC 15693). This eases the system design and allows simple
adaptation between applications.
All my-d® products are available in plain mode with open memory access and in secure mode with
memory access controlled by authentication procedures.
Flexible controls within the my-d ICs start with plain mode operation and individual page locking for
more complex applications various settings in secure mode can be set for multi user / multi
application configurations.
In secure mode a cryptographic algorithm based on 64-bit key is available. Mutual authentication,
message authentication codes (MAC) and customized access conditions protect the memory
against unauthorized access. Configurable value counters featuring anti-tearing functionality are
suitable for value token applications, such as limited use transportation tickets.
Architectural interoperability of all my-d® products enables an easy migration from simple to more
demanding applications.
In addition, the my-d® light (ISO/IEC 18000-3 mode 1 or ISO/IEC 15693) is part of the my-d®
family. Its optimized command set and memory expands the range of applications to cost sensitive
segments.

SLE66C160S Card by iNFINEON, Infineon SLE66C160S Card, SLE66C160S Card

SLE 66C160S is a member of the Infineon Technologies high-end security controller family
in 0.6 µm CMOS technology. The CPU provides the high efficiency of the SAB 8051
instruction set extended by additional powerful instructions together with enhanced
performance, memory sizes, and security features.
Security & Chip Card ICs
SLE 66C160S
16-bit Security Controller
in 0.6 µm CMOS Technology
32-Kbyte ROM, 1280 Byte RAM and
16-Kbyte EEPROM

Blank or Printed Cards, Key Fobs, Wristband, Round Coin Tags & RFID Labels; We will offer you the Best Possible Pricing! Up to 65% OFF

 A True American Company! Selling Millions and Millions of SmartCard Around the World. 

Click: Quote Request

Please Call: 1-800-537-1708